Home

>>Transformer >>Power Transformer >>220kv 110kv And 66kv Low Loss Series Power Transformer

220kv 110kv And 66kv Low Loss Series Power Transformer

Summary 

220kv 110kv and 66kv low-loss series transformer is our independently developed new generation of transformers on the basis of absorption of domestic and foreign advanced technology, which feature low local discharge, low loss, low noise, high reliability, strange protection against abrupt short circuit. Its excellent performance has been recognized by wide users and highly appraised by experts.The full-sealed suspending-cover free products sell well nationwide.

  • Product Details
  • Specification
  • Make an Inquiry

220kv 110kv and 66kv Low loss series Power Transformer

Summary
220kv 110kv and 66kv low-loss series transformer is our independently developed new generation of transformers on the basis of absorption of domestic and foreign advanced technology, which feature low local discharge, low loss, low noise, high reliability, strange protection against abrupt short circuit. Its excellent performance has been recognized by wide users and highly appraised by experts.The full-sealed suspending-cover free products sell well nationwide.

Reliable Structure
Amount of local discharged:The apparent discharge amount is less than 80pC under the 1.5 times of rated voltage;
Noise: Products of 63MVA and below is lower than 58dB(AN);
Power loss: no-load loss is 30% lower than that of IEC standard;
Reliability: All in-service product have no damages or oil leakage occurred;
Short circuit withstanding: Model SFZ11-50000/132 smoothly passed the short-circuit withstanding test of the national transformer quality supervision and inspection center and also passed Holland “KEMA” quality Control system.

Excellent Materials
Oxygen-free copper lines of lower resistivity, which will become smoother and burr-free after series of additional surface treatment, so the load loss of our transformer is lower and the electric performance is better.
High-quality silicon-steel plates which are of lower unit loss, and the no-load of the transformers is lower.
High-quality wooden laminating insulation pieces, which won’t split or move even under the influence of short circuit.
Thoroughly filtrated transformer oil containing less water, gas and impurities, which makes our transformers work better.
High-quality rubber sealing material, which can prevent the transformers form aging or leakage.

Coil
The high-voltage(HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. All stays and pads are chamfered to keep highly reliable insulation.
2. In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation. The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding-up,effectively lower the axial electrodynamic force generated at short-circuit of transformer and improve abrupt short-circuit withstanding capacity.



Rated
power

High
Voltage
H.V Tap
range
Low
Voltage
Connection
Symbol
Short-Circuit
Impedance(%)
No-load Loss On-Load Loss No-load
Current
9 Type 10Type 11 Type 9 Type 10Type 11 Type
31500 220 ±8×1.25% 6.3,6.6, YNd11 12~14 38 34 30 135 128 128 0.7
40000 45 41 36 157 149 149 0.63
50000 54 49 43 189 180 180 0.56
63000 63 57 50 220 209 209 0.56
90000 80 72 64 288 274 274 0.49
120000 99 89 79 346 329 329 0.49
150000 116 104 93 405 385 385 0.42
180000 135 122 108 468 445 445 0.42

Browse Other Products